ファームウェア 1.30 でハックキットのインストール

準備

標準ファームに root でログインできるようにする

標準ファームで起動

ログイン

時計を合わせる

[root@LS410D06E ~]# date
Sun Nov 10 23:13:16 JST 2013
[root@LS410D06E ~]#

ハックキットのファイルを置く

[root@LS410D06E ~]# ls -l /mnt/disk1/share/hackkit/
total 197644
-rwxrw-rw-    1 nobody   nogroup         81 Aug 17 11:51 hackkit_config*
-rwxr--r--    1 root     root         19938 Nov  4 15:40 hackkit_wheezy_131104.sh*
-rw-r--r--    1 root     root     102307216 Nov  4 18:10 hackkit_wheezy_armel_131104.tar.gz
-rw-r--r--    1 root     root     100029705 Nov  4 19:10 hackkit_wheezy_armhf_131104.tar.gz
-rwxr--r--    1 root     root          2254 Nov  4 17:41 makehackkit_131104.sh*
-rwxr-xr-x    1 root     root         15920 Oct 26  2008 mkimage*
[root@LS410D06E ~]#

インストールする HDD の準備

[root@LS410D06E ~]# parted -s /dev/sdb print
Model: ViPowER VP-89118(SD1) (scsi)
Disk /dev/sdb: 250GB
Sector size (logical/physical): 512B/512B
Partition Table: gpt
Disk Flags:

Number  Start   End     Size    File system     Name     Flags
 1      17.4kB  1024MB  1024MB  ext3            primary
 2      1024MB  6144MB  5119MB  xfs             primary
 3      6144MB  7168MB  1024MB  linux-swap(v1)  primary
 4      7168MB  250GB   243GB   xfs             primary

[root@LS410D06E ~]#

インストール

時計を合わせる

カスタマイズ

[root@LS410D06E ~]# cd /mnt/disk1/share/hackkit/
[root@LS410D06E hackkit]# cat hackkit_config
ADDRESS=192.168.2.57
HOSTNAME=ls410d
GATEWAY=192.168.2.96
NAMESERVER=192.168.1.5
[root@LS410D06E hackkit]#

インストーラの実行

[root@LS410D06E hackkit]# sh hackkit_wheezy_131104.sh
PRODUCTID = 0x0000001A
MACHINE LS410D
formating hard drive ...
mke2fs 1.42.4 (12-June-2012)
Filesystem label=
OS type: Linux
Block size=4096 (log=2)
Fragment size=4096 (log=2)
Stride=0 blocks, Stripe width=0 blocks
62720 inodes, 249995 blocks
12499 blocks (5.00%) reserved for the super user
First data block=0
Maximum filesystem blocks=260046848
8 block groups
32768 blocks per group, 32768 fragments per group
7840 inodes per group
Superblock backups stored on blocks:
        32768, 98304, 163840, 229376

Allocating group tables: done
Writing inode tables: done
Creating journal (4096 blocks): done
Writing superblocks and filesystem accounting information: done

meta-data=/dev/sdb2              isize=256    agcount=4, agsize=312448 blks
         =                       sectsz=512   attr=2, projid32bit=0
data     =                       bsize=4096   blocks=1249792, imaxpct=25
         =                       sunit=0      swidth=0 blks
naming   =version 2              bsize=4096   ascii-ci=0
log      =internal log           bsize=4096   blocks=2560, version=2
         =                       sectsz=512   sunit=0 blks, lazy-count=1
realtime =none                   extsz=4096   blocks=0, rtextents=0
Setting up swapspace version 1, size = 1000444 KiB
no label, UUID=b17adb01-be21-4c3d-bb91-d068735c7219
meta-data=/dev/sdb4              isize=256    agcount=4, agsize=14824896 blks
         =                       sectsz=512   attr=2, projid32bit=0
data     =                       bsize=4096   blocks=59299584, imaxpct=25
         =                       sunit=0      swidth=0 blks
naming   =version 2              bsize=4096   ascii-ci=0
log      =internal log           bsize=4096   blocks=28954, version=2
         =                       sectsz=512   sunit=0 blks, lazy-count=1
realtime =none                   extsz=4096   blocks=0, rtextents=0
mounting root file system ...
extracting hackkit archive ...
./
./var/
./var/lib/
./var/lib/apt/
./var/lib/apt/lists/
./var/lib/apt/lists/partial/
	:
	:
etc/pwrmgr
etc/pwrmgr/standby.inittab
etc/pwrmgr/pclist
etc/proftpd
etc/proftpd/proftpd.conf
etc/login.defs
etc/mtab
53386 blocks
53361 blocks
gziping /mnt/disk1/debinst/boot/initrd ... wait 5 minutes
Image Name:   initramfs
Created:      Sun Nov 10 23:19:19 2013
Image Type:   ARM Linux RAMDisk Image (gzip compressed)
Data Size:    11919122 Bytes = 11639.77 kB = 11.37 MB
Load Address: 0x00000000
Entry Point:  0x00000000
unmount /boot ...
[root@LS410D06E hackkit]#

電源 OFF

ハックキットで起動

HDD の交換（LS-WSGL, LS-QL 以外）

起動

動作確認

LED の確認

ログイン

Linux 3.3.4 (shinjuw.yamasita.jp) (pts/0)

ls410d login: guest
Password:
Linux ls410d 3.3.4 #1 Mon Oct 28 16:16:49 JST 2013 armv7l

The programs included with the Debian GNU/Linux system are free software;
the exact distribution terms for each program are described in the
individual files in /usr/share/doc/*/copyright.

Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
permitted by applicable law.
No directory, logging in with HOME=/
guest@ls410d:/$

root になる

guest@ls410d:/$ su - root
パスワード:
root@ls410d:~#

時計を合わせる

root@ls410d:~# date
2013年 11月 10日 日曜日 23:24:05 JST
root@ls410d:~#

USB メモリの認識

root@ls410d:~# tail -f /var/log/messages
	:
	:
Nov 10 23:24:49 ls410d kernel: usb 1-1: new full-speed USB device number 2 using ehci_marvell
Nov 10 23:24:49 ls410d kernel: usb-storage 1-1:1.0: Quirks match for vid 0ea0 pid 6828: 20
Nov 10 23:24:49 ls410d kernel: scsi2 : usb-storage 1-1:1.0
Nov 10 23:24:50 ls410d kernel: scsi 2:0:0:0: Direct-Access     BUFFALO  ClipDrive        1.88 PQ: 0 ANSI: 2
Nov 10 23:24:50 ls410d kernel: sd 0:0:0:0: Attached scsi generic sg0 type 0
Nov 10 23:24:50 ls410d kernel: sd 2:0:0:0: Attached scsi generic sg1 type 0
Nov 10 23:24:50 ls410d kernel: sd 2:0:0:0: [sdb] 64000 512-byte logical blocks: (32.7 MB/31.2 MiB)
Nov 10 23:24:50 ls410d kernel: sd 2:0:0:0: [sdb] Write Protect is off
Nov 10 23:24:50 ls410d kernel: sdb: sdb1
Nov 10 23:24:50 ls410d kernel: sd 2:0:0:0: [sdb] Attached SCSI removable disk

Nov 10 23:25:03 ls410d kernel: usb 1-1: USB disconnect, device number 2

プリンタの認識（LS-GL 以外）

Nov 10 23:25:54 ls410d kernel: usb 1-1: new high-speed USB device number 3 using ehci_marvell
Nov 10 23:25:54 ls410d kernel: usblp0: USB Bidirectional printer dev 3 if 0 alt 0 proto 2 vid 0x04B8 pid 0x0007

Nov 10 23:25:59 ls410d kernel: usb 1-1: USB disconnect, device number 3
Nov 10 23:25:59 ls410d kernel: usblp0: removed

リブートの確認

root@ls410d:~# shutdown -r now

シャットダウンの確認

Okey!

LS410D 楽天市場 Amazon