LS-VL の標準ファームを一つづつアップデートして、 最新まで追いついておく。
1.60 の次は、、、1.61 は出ていない?見落としている?ので、 1.62 をインストールする。
root@qube:~# mkdir /tmp/root mkdir: cannot create directory `/tmp/root': File exists root@qube:~# mount /dev/sdd2 /tmp/root root@qube:~#
root@qube:~# cd /tmp/root/etc/ root@qube:/tmp/root/etc# grep root shadow root::14895:0:99999:7::: root@qube:/tmp/root/etc#
!root@qube:/tmp/root/etc# patch < ~/sshd_config.diff patching file sshd_config root@qube:/tmp/root/etc#
root@qube:/tmp/root/etc# cd / root@qube:/# umount /tmp/root/ root@qube:/#
root@LS-VL815:~#できた。
root@LS-VL815:~# cat /proc/cpuinfo Processor : Feroceon 88FR131 rev 1 (v5l) BogoMIPS : 1594.16 Features : swp half thumb fastmult edsp CPU implementer : 0x56 CPU architecture: 5TE CPU variant : 0x2 CPU part : 0x131 CPU revision : 1 Hardware : Feroceon-KW Revision : 0000 Serial : 0000000000000000 root@LS-VL815:~#BogoMIPS が変わってるけど、、、
root@LS-VL815:~# cat /proc/meminfo MemTotal: 248668 kB MemFree: 57840 kB Buffers: 10152 kB Cached: 89616 kB SwapCached: 0 kB Active: 96616 kB Inactive: 68504 kB Active(anon): 69820 kB Inactive(anon): 240 kB Active(file): 26796 kB Inactive(file): 68264 kB Unevictable: 11412 kB Mlocked: 11412 kB SwapTotal: 999992 kB SwapFree: 999992 kB Dirty: 20 kB Writeback: 0 kB AnonPages: 76780 kB Mapped: 17392 kB Shmem: 2044 kB Slab: 9868 kB SReclaimable: 4020 kB SUnreclaim: 5848 kB KernelStack: 880 kB PageTables: 900 kB NFS_Unstable: 0 kB Bounce: 0 kB WritebackTmp: 0 kB CommitLimit: 1124324 kB Committed_AS: 234604 kB VmallocTotal: 761856 kB VmallocUsed: 23144 kB VmallocChunk: 514388 kB root@LS-VL815:~#
root@LS-VL815:~# uname -a Linux LS-VL815 3.3.4-88f6281+ #1 Mon Sep 10 18:10:35 JST 2012 armv5tel unknown root@LS-VL815:~#きたー!
バージョンが、0.02 しか変わっているのに、
カーネルを変えてくるとは、、
予想もしていなかった。
root@LS-VL815:~# dmesg Booting Linux on physical CPU 0 Initializing cgroup subsys cpu Linux version 3.3.4-88f6281+ (root@build2.dd-hot24.nas.buffalo.local) (gcc version 4.2.0 20070413 (prerelease)) #1 Mon Sep 10 18:10:35 JST 2012 CPU: Feroceon 88FR131 [56251311] revision 1 (ARMv5TE), cr=00053977 CPU: VIVT data cache, VIVT instruction cache Machine: Feroceon-KW Using UBoot passing parameters structure Memory policy: ECC disabled, Data cache writeback paging_init: zero_page=0xcfffc000 arm_bootmem_init: boot_pages=0x2 bitmap=0xfffa000 On node 0 totalpages: 65536 free_area_init_node: node 0, pgdat c04fcbd4, node_mem_map c1401000 Normal zone: 512 pages used for memmap Normal zone: 0 pages reserved Normal zone: 65024 pages, LIFO batch:15 pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 pcpu-alloc: [0] 0 Built 1 zonelists in Zone order, mobility grouping off. Total pages: 65024 Kernel command line: console=ttyS0,115200 root=/dev/sda2 rw initrd=0x00800040,12M panic=5 BOOTVER=0.26 PID hash table entries: 1024 (order: 0, 4096 bytes) Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) Memory: 256MB = 256MB total Memory: 236232k/236232k available, 25912k reserved, 0K highmem Virtual kernel memory layout: vector : 0xffff0000 - 0xffff1000 ( 4 kB) fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) vmalloc : 0xd0800000 - 0xff000000 ( 744 MB) lowmem : 0xc0000000 - 0xd0000000 ( 256 MB) modules : 0xbf000000 - 0xc0000000 ( 16 MB) .text : 0xc0008000 - 0xc04ac000 (4752 kB) .init : 0xc04ac000 - 0xc04d1000 ( 148 kB) .data : 0xc04d2000 - 0xc04fe5e0 ( 178 kB) .bss : 0xc04fe5e0 - 0xc0510168 ( 71 kB) SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 NR_IRQS:128 Console: colour dummy device 80x30 Calibrating delay loop... 1594.16 BogoMIPS (lpj=7970816) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 512 CPU: Testing write buffer coherency: ok Setting up static identity map for 0x173e8 - 0x17424 : consistent_pte=0xc8000b80 xor: measuring software checksum speed arm4regs : 1453.600 MB/sec 8regs : 1102.400 MB/sec 32regs : 1236.400 MB/sec xor: using function: arm4regs (1453.600 MB/sec) NET: Registered protocol family 16 Feroceon L2: Enabling L2 Feroceon L2: Cache support initialised. CPU Interface ------------- SDRAM_CS0 ....base 00000000, size 256MB SDRAM_CS1 ....disable SDRAM_CS2 ....disable SDRAM_CS3 ....disable PEX0_MEM ....base e0000000, size 128MB PEX0_IO ....base f2000000, size 1MB PEX1_MEM ....base e8000000, size 128MB PEX1_IO ....base f2100000, size 1MB INTER_REGS ....base f1000000, size 1MB NFLASH_CS ....base fa000000, size 2MB SPI_CS ....base f4000000, size 16MB BOOT_ROM_CS ....no such DEV_BOOTCS ....no such CRYPT_ENG ....base f0000000, size 2MB Marvell Development Board (LSP Version KW_LSP_5.1.3_patch13)-- MVLSV Soc: 88F6282 A0 LE Detected Tclk 200000000 and SysClk 533333333 gpiochip_add: registered GPIOs 0 to 63 on device: mv_gpio MV Buttons Device Load Marvell USB EHCI Host controller #0: c8047000 PEX0 interface detected no Link. PEX1 interface detected no Link. PCI host bridge to bus 0000:00 pci_bus 0000:00: root bus resource [io 0x0000-0xffffffff] pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff] PCI: bus0: Fast back to back transfers enabled PCI host bridge to bus 0000:01 pci_bus 0000:01: root bus resource [io 0x0000-0xffffffff] pci_bus 0000:01: root bus resource [mem 0x00000000-0xffffffff] PCI: bus1: Fast back to back transfers enabled bio: create slabat 0 raid6: int32x1 146 MB/s raid6: int32x2 175 MB/s raid6: int32x4 171 MB/s raid6: int32x8 156 MB/s raid6: using algorithm int32x2 (175 MB/s) vgaarb: loaded SCSI subsystem initialized Switching to clocksource kw_clocksource NET: Registered protocol family 2 IP route cache hash table entries: 2048 (order: 1, 8192 bytes) TCP established hash table entries: 8192 (order: 4, 65536 bytes) TCP bind hash table entries: 8192 (order: 3, 32768 bytes) TCP: Hash tables configured (established 8192 bind 8192) TCP reno registered UDP hash table entries: 256 (order: 0, 4096 bytes) UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) NET: Registered protocol family 1 PCI: CLS 0 bytes, default 32 Trying to unpack rootfs image as initramfs... rootfs image is not initramfs (no cpio magic); looks like an initrd Freeing initrd memory: 12288K XOR registered 4 channels XOR 2nd invalidate WA enabled cesadev_init(c04b4134) MV Buttons Driver Load MICON ctrl (C) BUFFALO INC. V.1.00 installed. Buffalo Gpio Control Driver (C) BUFFALO INC. Ver.1.00 installed. Buffalo CPU Inerupts Driver (C) BUFFALO INC. Ver.0.01 alpha1 installed. Kernel event proc (C) BUFFALO INC. V.1.00 installed. initial_polarity_val = 0x00030000 initial_polarity_val_high = 0x0001f100 Buffalo GPIO SATA Hotplug Event Driver (C) BUFFALO INC. Ver.1.00 installed. VFS: Disk quotas dquot_6.5.2 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) JFFS2 version 2.2. (NAND) 息 2001-2006 Red Hat, Inc. fuse init (API version 7.18) SGI XFS with ACLs, security attributes, large block numbers, no debug enabled SGI XFS Quota Management subsystem msgmni has been set to 485 alg: No test for cipher_null (cipher_null-generic) alg: No test for ecb(cipher_null) (ecb-cipher_null) alg: No test for digest_null (digest_null-generic) alg: No test for compress_null (compress_null-generic) alg: No test for stdrng (krng) Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) io scheduler noop registered io scheduler deadline registered (default) io scheduler cfq registered Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled serial8250.0: ttyS0 at MMIO 0xf1012000 (irq = 33) is a 16550A console [ttyS0] enabled serial8250.1: ttyS1 at MMIO 0xf1012100 (irq = 34) is a 16550A brd: module loaded loop: module loaded Integrated Sata device found mvSataInitAdapter : regVal changed(0x00000010) scsi0 : Marvell SCSI to SATA adapter scsi1 : Marvell SCSI to SATA adapter ** BUFFALO Disable Command Queuing Function [0 0] ** scsi 0:0:0:0: Direct-Access SAMSUNG SP2504C VT10 PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] Sector size 0 reported, assuming 512. sd 0:0:0:0: [sda] 488283264 512-byte logical blocks: (250 GB/232 GiB) sd 0:0:0:0: [sda] 0-byte physical blocks sd 0:0:0:0: Attached scsi generic sg0 type 0 sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 23 00 00 00 SPI Serial flash detected @ 0xf4000000, 512KB (8sec x 64KB) NAND init: NAND device not found on board Loading Marvell Ethernet Driver: o Cached descriptors in DRAM o DRAM SW cache-coherency o 2 Giga ports supported o Single RX Queue support - ETH_DEF_RXQ=0 o Single TX Queue support - ETH_DEF_TXQ=0 o TCP segmentation offload (TSO) supported o Receive checksum offload supported o Transmit checksum offload supported o Driver ERROR statistics enabled o Proc tool API enabled o Rx descripors: q0=128 o Tx descripors: q0=532 o Loading network interface(s): o register under mv88fx_eth platform sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA o eth0, ifindex = 2, GbE port = 0 Warning: Giga 1 is Powered Off rtc-mv rtc-mv: rtc core: registered rtc-mv as rtc0 md: linear personality registered for level -1 md: raid0 personality registered for level 0 md: raid1 personality registered for level 1 md: raid6 personality registered for level 6 md: raid5 personality registered for level 5 md: raid4 personality registered for level 4 device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com TCP cubic registered NET: Registered protocol family 17 NET: Registered protocol family 15 Registering the dns_resolver key type rtc-mv rtc-mv: setting system clock to 2013-01-27 12:59:42 UTC (1359291582) sd 0:0:0:0: [sda] Sector size 0 reported, assuming 512. sda: sda1 sda2 sda3 sda4 sda5 sda6 sd 0:0:0:0: [sda] Sector size 0 reported, assuming 512. sd 0:0:0:0: [sda] Attached SCSI disk md: Waiting for all devices to be available before autodetect md: If you don't use raid, use raid=noautodetect md: Autodetecting RAID arrays. md: Scanned 0 and added 0 devices. md: autorun ... md: ... autorun DONE. RAMDISK: gzip image found at block 0 VFS: Mounted root (ext2 filesystem) on device 1:0. kjournald starting. Commit interval 5 seconds EXT3-fs (sda1): using internal journal EXT3-fs (sda1): mounted filesystem with writeback data mode umount: sending ioctl 4c01 to a partition! umount: sending ioctl 4c01 to a partition! kjournald starting. Commit interval 5 seconds EXT3-fs (sda2): using internal journal EXT3-fs (sda2): mounted filesystem with writeback data mode umount: sending ioctl 4c01 to a partition! umount: sending ioctl 4c01 to a partition! kjournald starting. Commit interval 5 seconds EXT3-fs (sda2): using internal journal EXT3-fs (sda2): mounted filesystem with writeback data mode VFS: Mounted root (ext3 filesystem) on device 8:2. Trying to move old root to /initrd ... okay Freeing init memory: 148K udevd (725): /proc/725/oom_adj is deprecated, please use /proc/725/oom_score_adj instead. EXT3-fs (sda2): error: unrecognized mount option "relatime" or missing value Adding 999992k swap on /dev/sda5. Priority:-1 extents:1 across:999992k kjournald starting. Commit interval 5 seconds EXT3-fs (sda1): using internal journal EXT3-fs (sda1): mounted filesystem with writeback data mode usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_marvell ehci_marvell.70059: Marvell Orion EHCI ehci_marvell ehci_marvell.70059: new USB bus registered, assigned bus number 1 ehci_marvell ehci_marvell.70059: irq 19, io base 0xf1050100 ehci_marvell ehci_marvell.70059: USB 2.0 started, EHCI 1.00 hub 1-0:1.0: USB hub found hub 1-0:1.0: 1 port detected ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver uhci_hcd: USB Universal Host Controller Interface driver Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. usbcore: registered new interface driver usblp eth0: link down eth0: started eth0: link up, full duplex, speed 1 Gbps program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO XFS (sda6): Mounting Filesystem XFS (sda6): Ending clean mount bfSetMagicKey > Changed to 0x71 from 0x5c root@LS-VL815:~#
root@LS-VL815:~# cat /etc/linkstation_release VERSION=1.62 SUBVERSION=HDD 3.21 PRODUCTID=0x00000000 BUILDDATE=2012/09/10 18:13:35 root@LS-VL815:~# cat /proc/buffalo/firmware SERIES=LinkStation PRODUCTNAME=LS-VL(JOMEI) VERSION=0.16 SUBVERSION=FLASH 0.00 PRODUCTID=0x00000016 BUILDDATE=2012/09/10 18:01:26 BOOTVER=0.26 root@LS-VL815:~#
root@LS-VL815:~# ps PID Uid VSZ Stat Command 1 root 3140 S init 2 root SW [kthreadd] 3 root SW [ksoftirqd/0] 4 root RW [kworker/0:0] 5 root SW [kworker/u:0] 6 root SW< [khelper] 7 root SW [kworker/u:1] 98 root SW [sync_supers] 100 root SW [bdi-default] 102 root SW< [kblockd] 110 root SW< [md] 206 root SW [kswapd0] 255 root SW [fsnotify_mark] 273 root SW< [xfs_mru_cache] 274 root SW< [xfslogd] 275 root SW< [xfsdatad] 276 root SW< [xfsconvertd] 277 root SW< [crypto] 304 root SW [crypto] 305 root SW [crypto_ret] 491 root SW [scsi_eh_0] 492 root SW [scsi_eh_1] 514 root SW [mtdblock0] 526 root SW< [kcryptd] 606 root SW [flush-8:0] 684 root SW [kjournald] 725 root 1776 S < /sbin/udevd --daemon 1568 root SW [kjournald] 1620 root SW [khubd] 1692 root 1676 S /sbin/dhcpcd -L /etc/dhcpc -h LS-VL815 -t 15 -x -y -z 1749 root 1912 S syslogd -m 0 1751 root 2772 S klogd 1760 root 3676 S /usr/sbin/inetd 1764 root 1880 S /usr/local/sbin/errormon 1769 root 2260 S /bin/sh /usr/local/sbin/kernelmon 1780 root 27244 S /usr/bin/python /usr/local/sbin/BuffaloXMLRPCServer.p 1807 root 2716 S /bin/sh /usr/local/sbin/miconmon_exec.sh start 1883 root SW [xfsbufd/sda6] 1884 root SW [xfsaild/sda6] 1989 root 1860 S /usr/local/sbin/logchkd 2020 root 2812 S /bin/bash /usr/local/sbin/diskmon_exec.sh start 2058 root 4408 S /usr/sbin/lighttpd.webui -f /etc/lighttpd/buffalo-web 2065 root 4408 S /usr/sbin/lighttpd.webui -f /etc/lighttpd/buffalo-web 2080 root 10408 S /usr/local/sbin/smbd -D 2082 root 10408 S /usr/local/sbin/smbd -D 2083 root 6080 S /usr/local/sbin/nmbd -D 2121 root 2208 S /usr/local/sbin/clientUtil_server -i eth0 2124 root 1796 S /usr/local/sbin/mDNSResponderPosix -b -f /etc/bonjour 2127 root 4180 S /usr/local/sbin/lsprcvd -i eth0 2131 root 1852 S /usr/local/sbin/daemonwatch -a /etc/daemonwatch.list 2137 root 3416 S /usr/sbin/crond 2199 root 2328 S lpd Waiting 2211 root 1756 S /usr/local/BootServer/tftpd 2212 root 9948 S /usr/local/BootServer/rarpcfgd 2215 root 18148 S /usr/local/BootServer/rarpd 2221 root 1624 S /usr/local/BootServer/fwupdated 2496 root 3268 S /usr/local/sbin/mt-daapd -c /etc/mt-daapd.conf 2497 root 11456 S /usr/local/sbin/mt-daapd -c /etc/mt-daapd.conf 2764 root 2756 S /usr/local/twonky-alt/atomheartmother -utf8 -exedir / 2767 root 3200 S /usr/local/twonky-alt/initdx -utf8 -exedir /usr/local 2777 root 11680 S /usr/local/twonky-alt/initdx -utf8 -exedir /usr/local 2788 root Z [initdx] 2917 root 3284 S cat /proc/buffalo/kernevnt 2976 squeezeboxs 53700 S /usr/local/squeezebox/perl-5.10.0/bin/perl /usr/lo 2993 root SW [kworker/0:2] 3014 squeezeboxs 97916 S /usr/sbin/mysqld --defaults-file=/mnt/disk1/spool/ 3043 root 4088 S /usr/local/sbin/sshd 3122 root 3420 S /sbin/getty -L ttyS0 115200 vt100 4754 root 6804 R sshd: root@pts/0 4805 root 2392 S -sh 8857 root 3284 S sleep 10 8887 root [] 8888 root 3420 R ps root@LS-VL815:~#
root@LS-VL815:~# cat /proc/mdstat Personalities : [linear] [raid0] [raid1] [raid6] [raid5] [raid4] unused devices:root@LS-VL815:~#
root@LS-VL815:~# df Filesystem 1k-blocks Used Available Use% Mounted on /dev/sda2 4923420 839968 3833356 18% / udev 10240 88 10152 1% /dev /dev/ram1 15360 152 15208 1% /mnt/ram /dev/sda1 992036 33244 908796 4% /boot /dev/disk1_6 237023872 610784 236413088 0% /mnt/disk1 tmpfs 8192 1800 6392 22% /mnt/ram/com.kernel.org root@LS-VL815:~# mount rootfs on / type rootfs (rw) /dev/root on / type ext3 (rw,relatime,errors=continue,barrier=1,data=writeback) proc on /proc type proc (rw,relatime) sysfs on /sys type sysfs (rw,relatime) udev on /dev type tmpfs (rw,nosuid,relatime,size=10240k,mode=755) devpts on /dev/pts type devpts (rw,relatime,gid=4,mode=620) /dev/ram1 on /mnt/ram type tmpfs (rw,relatime,size=15360k) /dev/sda1 on /boot type ext3 (rw,relatime,errors=continue,barrier=1,data=writeback) usbfs on /proc/bus/usb type usbfs (rw,relatime) /dev/disk1_6 on /mnt/disk1 type xfs (rw,noatime,attr2,usrquota,grpquota) tmpfs on /mnt/ram/com.kernel.org type tmpfs (rw,relatime,size=8192k) root@LS-VL815:~#カーネルが変わっているのに、変化が見えない。。。節穴?
|
← 標準ファームのアップデート |
ハックの記録 LinkStation/玄箱 をハックしよう |
→ カーネル 3.3.4 のソースコード |
Copyright (C) 2003-2013 Yasunari Yamashita. All Rights Reserved.
yasunari @ yamasita.jp 山下康成@京都府向日市