振り出しからやり直し

パーティションを削除した HDD の作成

root@qube:~# parted -s /dev/sdd print
Warning: Could not determine physical sector size for /dev/sdd.
Using the logical sector size (512).
Model: ViPowER VP-89118(SD1) (scsi)
Disk /dev/sdd: 250GB
Sector size (logical/physical): 512B/512B
Partition Table: gpt

Number  Start   End     Size    File system  Name     Flags
 1      1049kB  1026MB  1024MB  ext3         primary
 2      1026MB  6146MB  5120MB               primary
 3      6146MB  6147MB  1049kB               primary
 4      6147MB  6148MB  1049kB               primary
 5      6148MB  7172MB  1024MB               primary
 6      7172MB  242GB   235GB                primary

root@qube:~# parted -s /dev/sdd rm 6
Warning: Could not determine physical sector size for /dev/sdd.
Using the logical sector size (512).
Error: Partition(s) 16 on /dev/sdd have been written, but we have been unable to inform the kernel of the change, probably because it/they are in use.  As a result, the old partition(s) will remain in use.  You should reboot now before making further changes.
root@qube:~# parted -s /dev/sdd rm 5
Warning: Could not determine physical sector size for /dev/sdd.
Using the logical sector size (512).
Error: Partition(s) 16 on /dev/sdd have been written, but we have been unable to inform the kernel of the change, probably because it/they are in use.  As a result, the old partition(s) will remain in use.  You should reboot now before making further changes.
root@qube:~# parted -s /dev/sdd rm 4
	:
root@qube:~# parted -s /dev/sdd rm 3
	:
root@qube:~# parted -s /dev/sdd rm 2
	:
root@qube:~# parted -s /dev/sdd rm 1
	:
root@qube:~# parted -s /dev/sdd print
Warning: Could not determine physical sector size for /dev/sdd.
Using the logical sector size (512).
Model: ViPowER VP-89118(SD1) (scsi)
Disk /dev/sdd: 250GB
Sector size (logical/physical): 512B/512B
Partition Table: gpt

Number  Start  End  Size  File system  Name  Flags

root@qube:~# 

fdisk でも削除しておく

root@qube:~# fdisk /dev/sdd

WARNING: GPT (GUID Partition Table) detected on '/dev/sdd'! The util fdisk doesn't support GPT. Use GNU Parted.


WARNING: DOS-compatible mode is deprecated. It's strongly recommended to
         switch off the mode (command 'c') and change display units to
         sectors (command 'u').

Command (m for help): p

Disk /dev/sdd: 250.0 GB, 250001031168 bytes
255 heads, 63 sectors/track, 30394 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000

   Device Boot      Start         End      Blocks   Id  System
/dev/sdd1               1       30395   244141631+  ee  GPT

Command (m for help): d
Selected partition 1

Command (m for help): p

Disk /dev/sdd: 250.0 GB, 250001031168 bytes
255 heads, 63 sectors/track, 30394 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000

   Device Boot      Start         End      Blocks   Id  System

Command (m for help): w
The partition table has been altered!

Calling ioctl() to re-read partition table.
Syncing disks.
root@qube:~#

起動

実験用 HDD のフォーマット

再起動

管理画面へのアクセス

「読み込んでいます...」のまま。

再々起動しても、
HDD を標準ファームの１本だけにしても、
「読み込んでいます...」のまま。

やられた。振り出しどころか、 トラブルシュートから始めないといけなくなった（泣

LS-QVL バッファローダイレクト 楽天市場 amazon ドスパラ livedoor デパート Yahoo!ショッピング バリューモア ムラウチドットコム