brick:~# tail -f /var/log/messages : : Sep 14 22:32:10 brick kernel: usb 1-1: new high speed USB device using ehci_marvell and address 2 Sep 14 22:32:10 brick kernel: usb 1-1: configuration #1 chosen from 1 choice Sep 14 22:32:10 brick kernel: scsi2 : SCSI emulation for USB Mass Storage devices Sep 14 22:32:15 brick kernel: scsi 2:0:0:0: Direct-Access ViPowER VP-89118(SD1) 2.10 PQ: 0 ANSI: 4 Sep 14 22:32:15 brick kernel: sd 2:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB) Sep 14 22:32:15 brick kernel: sd 2:0:0:0: [sdb] Write Protect is off Sep 14 22:32:15 brick kernel: sd 2:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB) Sep 14 22:32:15 brick kernel: sd 2:0:0:0: [sdb] Write Protect is off Sep 14 22:32:15 brick kernel: sdb: sdb1 sdb2 sdb3 sdb4 sdb5 sdb6 Sep 14 22:32:15 brick kernel: sd 2:0:0:0: [sdb] Attached SCSI disk Sep 14 22:32:15 brick kernel: sd 2:0:0:0: Attached scsi generic sg1 type 0
brick:~# fdisk -l /dev/sdb WARNING: GPT (GUID Partition Table) detected on '/dev/sdb'! The util fdisk doesn't support GPT. Use GNU Parted. Disk /dev/sdb: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0x00000000 Device Boot Start End Blocks Id System /dev/sdb1 1 60802 488386583+ ee EFI GPT brick:~#
brick:~# parted -su: parted: command not found brick:~# apt-get install parted Reading package lists... Done Building dependency tree Reading state information... Done The following extra packages will be installed: libparted1.8-10 Suggested packages: libparted1.8-dev libparted1.8-i18n parted-doc The following NEW packages will be installed: libparted1.8-10 parted 0 upgraded, 2 newly installed, 0 to remove and 0 not upgraded. Need to get 270kB of archives. After this operation, 623kB of additional disk space will be used. Do you want to continue [Y/n]? y Get:1 http://ftp.jp.debian.org lenny/main libparted1.8-10 1.8.8.git.2008.03.24-11.1 [202kB] Get:2 http://ftp.jp.debian.org lenny/main parted 1.8.8.git.2008.03.24-11.1 [67.6kB] Fetched 270kB in 3s (85.5kB/s) Selecting previously deselected package libparted1.8-10. (Reading database ... 10020 files and directories currently installed.) Unpacking libparted1.8-10 (from .../libparted1.8-10_1.8.8.git.2008.03.24-11.1_armel.deb) ... Selecting previously deselected package parted. Unpacking parted (from .../parted_1.8.8.git.2008.03.24-11.1_armel.deb) ... Processing triggers for man-db ... Setting up libparted1.8-10 (1.8.8.git.2008.03.24-11.1) ... Setting up parted (1.8.8.git.2008.03.24-11.1) ... brick:~#
brick:~# parted /dev/sdb GNU Parted 1.8.8 Using /dev/sdb Welcome to GNU Parted! Type 'help' to view a list of commands. (parted) print Model: ViPowER VP-89118(SD1) (scsi) Disk /dev/sdb: 500GB Sector size (logical/physical): 512B/512B Partition Table: gpt Number Start End Size File system Name Flags 1 17.4kB 1024MB 1024MB ext3 primary 2 1024MB 6144MB 5120MB xfs primary 3 6144MB 6144MB 512B primary 4 6144MB 6144MB 512B primary 5 6144MB 7168MB 1024MB linux-swap primary 6 7168MB 492GB 485GB xfs primary (parted) quit brick:~#LS-XHL と同じ
brick:~# mkdir /tmp/root brick:~# mount /dev/sdb2 /tmp/root brick:~# ls /tmp/root bin debugtool etc initrd lighttpd.webui modules root share tmp var boot dev home lib mnt proc sbin sys usr www brick:~# mount /dev/sdb1 /tmp/root/boot brick:~# ls !$ ls /tmp/root/boot hddrootfs.buffalo.updated.done lost+found uImage.buffalo initrd.buffalo u-boot.buffalo brick:~# mount /dev/sdb6 /tmp/root/mnt/disk1/ brick:~# ls !$ ls /tmp/root/mnt/disk1/ share spool brick:~#LS-XHL と同じ。まあ、ファームが共通だから当たり前
|
← メインボード / Main board |
ハックの記録 LinkStation/玄箱 をハックしよう |
→ telnet できるようにする |