ファームウェア 1.11 でハックキット：インストール

カスタマイズ

root@LS-QL-EM233:~# cd /mnt/disk1/share/hackkit/
root@LS-QL-EM233:/mnt/disk1/share/hackkit# ls
hackkit_090226.tar.gz  mkimage                setup_090203.sh
hackkit_090227.sh      ramroot_090225.sh
hackkit_config.sample  rsync_090225.sh
root@LS-QL-EM233:/mnt/disk1/share/hackkit# cp hackkit_config.sample hackkit_config
root@LS-QL-EM233:/mnt/disk1/share/hackkit# cat hackkit_config
ADDRESS=192.168.2.50
HOSTNAME=qube
root@LS-QL-EM233:/mnt/disk1/share/hackkit# 

インストーラの実行

root@LS-QL-EM233:/mnt/disk1/share/hackkit# sh hackkit_090227.sh
PRODUCTID = 0x00004000
building md...
-- rebuild mdadm.conf for BOOT, ROOTFS --
md: md10 stopped.
mdadm: /dev/disk1_1 has wrong uuid.
mdadm: /dev/disk1_2 has wrong uuid.
md: bind
raid1: raid set md10 active with 1 out of 4 mirrors
mdadm: /dev/md10md: md1 stopped.
 has been started with 1 drive (out of 4).
mdadm: /dev/disk1_1 has wrong uuid.
md: bind
raid1: raid set md1 active with 1 out of 4 mirrors
mdadm: /dev/md1 md: md0 stopped.
has been started with 1 drive (out of 4).
md: bind
raid1: raid set md0 active with 1 out of 4 mirrors
mdadm: /dev/md0 has been started with 1 drive (out of 4).
-- setup max error counts --
/sys/block/md0/md/maxerr_cnt is setted to -1
/sys/block/md1/md/maxerr_cnt is setted to -1
/sys/block/md10/md/maxerr_cnt is setted to -1
mounting root file system ...
Filesystem "md1": Disabling barriers, not supported by the underlying device
XFS mounting filesystem md1
extracting hackkit archive ...
./
./var/
./var/lib/
./var/lib/apt/
./var/lib/apt/lists/
./var/lib/apt/lists/partial/
	:
	:
./selinux/
./srv/
./opt/
./media/
./initrd/
creating /etc/fstab ...
creating miconapl ...
creating kernelmon ...
creating usb ...
checking /dev/md0
fsck 1.40.5 (27-Jan-2008)
e2fsck 1.40.5 (27-Jan-2008)
Pass 1: Checking inodes, blocks, and sizes
Pass 2: Checking directory structure
Pass 3: Checking directory connectivity
/lost+found not found.  Create? yes

Pass 4: Checking reference counts
Pass 5: Checking group summary information

/dev/md0: ***** FILE SYSTEM WAS MODIFIED *****
/dev/md0: 19/62976 files (15.8% non-contiguous), 48587/250976 blocks
mounting /boot ...
kjournald starting.  Commit interval 5 seconds
EXT3 FS on md0, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
editing initrd ...
110000+1 records in
110000+1 records out
gunziping /mnt/debinst/boot/initrd.gz ...
gziping /mnt/debinst/boot/initrd ... wait 5 minutes
Image Name:   initrd
Created:      Mon Jul 13 23:05:19 2009
Image Type:   ARM Linux RAMDisk Image (gzip compressed)
Data Size:    7040052 Bytes = 6875.05 kB = 6.71 MB
Load Address: 0x00000000
Entry Point:  0x00000000
unmount /boot ...
root@LS-QL-EM233:/mnt/disk1/share/hackkit#

電源 OFF

LS-QL バッファローダイレクト 楽天市場 amazon livedoorデパート Sofmap バリューモア Yahoo!ショッピングトップ ムラウチドットコム