LS-XHL, LS-QL 対応ハックキットの確認（１）LS-WSGL

Debian LS-WSGL/R1
LS-XHL, LS-QL に対応したハックキットを作り直したので、 今度こそ全機種で確認していく。

最初は、やっぱり LS-WSGL。
LS-QL 対応で変更した initrd の /linuxrc は悪影響していないようなので、 問題ないはず。
何か条件を変えないとおもしろくないので、 （シリアルコンソールではなく）telnet してインストールする。

準備（LS-WSGL の場合）

標準ファームに root でログインできるようにする

済み

標準ファームの HDD のコピー

(a) データ領域に RAID が設定されていると何かと面倒なので、 RAID は解除しておきます

済み

(b) ハックキットをインストールする１台目の HDD に 標準ファームをコピーします。

(b-1) SATA2 にのみ HDD を接続し、起動します。
(b-2) root でログインします。
(b-3) ハックキットをインストールする１台目の HDD を USB で接続します。
(b-4) /mnt/usbdisk1 に自動的にマウントされた場合はアンマウントします。
root@LS-WSGL678:~# df
Filesystem           1k-blocks      Used Available Use% Mounted on
/dev/md1               4993920    292412   4701508   6% /
/dev/ram1                15360       104     15256   1% /mnt/ram
/dev/md0                988064    126436    861628  13% /boot
/dev/usbdisk1_1         988064    137432    850632  14% /mnt/usbdisk1
/dev/disk1_6         187419092    142100 187276992   0% /mnt/disk1
root@LS-WSGL678:~# umount /mnt/usbdisk1/
root@LS-WSGL678:~#
(b-5) sdb にパーティションを切ります。
root@LS-WSGL678:~# fdisk -l /dev/sdb

Disk /dev/sdb: 250.0 GB, 250059350016 bytes
255 heads, 63 sectors/track, 30401 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

   Device Boot      Start         End      Blocks   Id  System
/dev/sdb1               1         125     1004031   83  Linux
/dev/sdb2             126         748     5004247+  83  Linux
/dev/sdb4             749       30401   238187722+   5  Extended
/dev/sdb5             749         873     1004031   82  Linux swap
/dev/sdb6             874       30295   236332183+  83  Linux
root@LS-WSGL678:~#
そのまま使う。
(b-6) フォーマットします（不要かも）
フォーマットは略。
(b-7) RAID をリビルドします
root@LS-WSGL678:~# mdadm -a /dev/md0 /dev/sdb1
mdadm: added /dev/sdb1
root@LS-WSGL678:~# mdadm -a /dev/md1 /dev/sdb2
mdadm: added /dev/sdb2
root@LS-WSGL678:~# mdadm -a /dev/md10 /dev/sdb5
mdadm: added /dev/sdb5
root@LS-WSGL678:~#
今回は、telnet して実行したので、メッセージは少ない。 
root@LS-WSGL678:~# cat /proc/mdstat
Personalities : [raid0] [raid1]
md1 : active raid1 sdb2[2] sda2[0]
      5004160 blocks [2/1] [U_]
        resync=DELAYED

md10 : active raid1 sdb5[2] sda5[0]
      1003904 blocks [2/1] [U_]
        resync=DELAYED

md0 : active raid1 sdb1[2] sda1[0]
      1003904 blocks [2/1] [U_]
      [================>....]  recovery = 80.7% (811072/1003904) finish=0.1min speed=19147K/sec

unused devices: <none>
root@LS-WSGL678:~#
待つ。 
root@LS-WSGL678:~# !cat
cat /proc/mdstat
Personalities : [raid0] [raid1]
md1 : active raid1 sdb2[1] sda2[0]
      5004160 blocks [2/2] [UU]

md10 : active raid1 sdb5[1] sda5[0]
      1003904 blocks [2/2] [UU]

md0 : active raid1 sdb1[1] sda1[0]
      1003904 blocks [2/2] [UU]

unused devices: <none>
root@LS-WSGL678:~#
(b-8) 電源 OFF。コンセントも抜きます。

(c) ハックキットをインストールする２台目の HDD に標準ファームをコピーします。

(c-1) 上記 (b) でコピーした HDD を　SATA2 に接続し、起動します。
(c-2) root でログインします。
BUFFALO INC. LinkStation series
LS-WSGL678 login: root
root@LS-WSGL678:~#
(c-3) ハックキットをインストールする２台目の HDD を USB で接続します。
以下、(b-4) ～ (b-8) を繰り返し。 
root@LS-WSGL678:~# df
Filesystem           1k-blocks      Used Available Use% Mounted on
/dev/md1               4993920    292188   4701732   6% /
/dev/ram1                15360       108     15252   1% /mnt/ram
/dev/md0                988064    126436    861628  13% /boot
/dev/disk1_6         236216784    455928 235760856   0% /mnt/disk1
/dev/usbdisk1_1         988064    137432    850632  14% /mnt/usbdisk1
root@LS-WSGL678:~# umount /mnt/usbdisk1/
root@LS-WSGL678:~# fdisk -l /dev/sdb

Disk /dev/sdb: 250.0 GB, 250059350016 bytes
255 heads, 63 sectors/track, 30401 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

   Device Boot      Start         End      Blocks   Id  System
/dev/sdb1               1         125     1004031   83  Linux
/dev/sdb2             126         748     5004247+  83  Linux
/dev/sdb4             749       30401   238187722+   5  Extended
/dev/sdb5             749         873     1004031   82  Linux swap
/dev/sdb6             874       30295   236332183+  83  Linux
root@LS-WSGL678:~# mdadm -a /dev/md0 /dev/sdb1
mdadm: added /dev/sdb1
root@LS-WSGL678:~# mdadm -a /dev/md1 /dev/sdb2
mdadm: added /dev/sdb2
root@LS-WSGL678:~# mdadm -a /dev/md10 /dev/sdb5
mdadm: added /dev/sdb5
root@LS-WSGL678:~# cat /proc/mdstat
Personalities : [raid0] [raid1]
md1 : active raid1 sdb2[2] sda2[1]
      5004160 blocks [2/1] [_U]
        resync=DELAYED

md10 : active raid1 sdb5[2] sda5[1]
      1003904 blocks [2/1] [_U]
        resync=DELAYED

md0 : active raid1 sdb1[2] sda1[1]
      1003904 blocks [2/1] [_U]
      [===============>.....]  recovery = 79.6% (800512/1003904) finish=0.1min speed=19107K/sec

unused devices: <none>
root@LS-WSGL678:~# cat /proc/mdstat
Personalities : [raid0] [raid1]
md1 : active raid1 sdb2[0] sda2[1]
      5004160 blocks [2/2] [UU]

md10 : active raid1 sdb5[0] sda5[1]
      1003904 blocks [2/2] [UU]

md0 : active raid1 sdb1[0] sda1[1]
      1003904 blocks [2/2] [UU]

unused devices: <none>
root@LS-WSGL678:~#
できた。

(d)接続

標準ファームで起動

ハックキットのファイルを置きます

RamBoot モードへの変更

(1) telnet して、もしくはシリアルコンソールから root でログインします。

BUFFALO INC. LinkStation series
LS-WSGL678 login: root
root@LS-WSGL678:~#

(2) initrd.buffalo の変更

root@LS-WSGL678:~# cd /mnt/disk1/share/hackkit
root@LS-WSGL678:/mnt/disk1/share/hackkit# ls
hackkit_090226.sh      hackkit_config         mkimage                rsync_090225.sh
hackkit_090226.tar.gz  hackkit_config.sample  ramroot_090225.sh      setup_090203.sh
root@LS-WSGL678:/mnt/disk1/share/hackkit# sh ramroot_090225.sh
Extracting initrd...
89028+1 records in
89028+1 records out
mounting initrd...
editing linuxrc...
clearing root's password...
rebuilding initrd.buffalo...
gziping initrd ... wait 5 minutes
Image Name:   initrd
Created:      Wed Feb 25 22:24:04 2009
Image Type:   ARM Linux RAMDisk Image (gzip compressed)
Data Size:    5674658 Bytes = 5541.66 kB = 5.41 MB
Load Address: 0x00000000
Entry Point:  0x00000000
root@LS-WSGL678:/mnt/disk1/share/hackkit#
できた。

(3) 電源 OFF。コンセントも抜きます。

(4) コンセントを刺し、電源 ON。RamRoot モードで起動してきます。

ログイン


BUFFALO INC. LinkStation series
LS-WSGL-EM678 login: root


BusyBox v1.1.1 (2008.11.04-08:25+0000) Built-in shell (ash)
Enter 'help' for a list of built-in commands.

#

時計を合わせる

# date
Fri Feb 27 16:53:55 JST 2009
#
あってる。

ディスクのマウント

# mount /dev/sda6 /mnt/disk1
# cd /mnt/disk1/share/hackkit
# ls
# ls
hackkit_090226.tar.gz  hackkit_config         mkimage                rsync_090225.sh
hackkit_090227.sh      hackkit_config.sample  ramroot_090225.sh      setup_090203.sh
#

インストール

カスタマイズ

前回作った hackkit_config が残っている。 
# cat hackkit_config
ADDRESS=192.168.2.45
HOSTNAME=mini
#

インストーラの実行

# cd /mnt/disk1/share/hackkit
# sh hackkit_090227.sh
PRODUCTID = 0x00003002
building md...
-- rebuild mdadm.conf for BOOT, ROOTFS --
mdadm: /dev/disk2_1 has wrong uuid.
mdadm: /dev/disk1_1 has wrong uuid.
mdadm: /dev/disk2_2 has wrong uuid.
mdadm: /dev/disk1_2 has wrong uuid.
mdadm: /dev/md10 has been started with 2 drives.
mdadm: /dev/disk2_1 has wrong uuid.
mdadm: /dev/disk1_1 has wrong uuid.
mdadm: /dev/md1 has been started with 2 drives.
mdadm: /dev/md0 has been started with 2 drives.
-- setup max error counts --
/sys/block/md0/md/maxerr_cnt is setted to -1
/sys/block/md1/md/maxerr_cnt is setted to -1
/sys/block/md10/md/maxerr_cnt is setted to -1
mounting root file system ...
extracting hackkit archive ...
./
./var/
./var/lib/
./var/lib/apt/
./var/lib/apt/lists/
./var/lib/apt/lists/partial/
./var/lib/apt/lists/ftp.jp.debian.org_debian_dists_lenny_Release
	:
	:
./opt/
./media/
./initrd/
creating /etc/fstab ...
creating miconapl ...
creating kernelmon ...
copying /lib/modules ...
lib/modules/
lib/modules/2.6.16.16-arm1/
lib/modules/2.6.16.16-arm1/kernel/
	:
	:
lib/modules/2.6.16.16-arm1/modules.alias
lib/modules/2.6.16.16-arm1/modules.symbols
creating usb ...
checking /dev/md0
fsck 1.27 (8-Mar-2002)
e2fsck 1.27 (8-Mar-2002)
Pass 1: Checking inodes, blocks, and sizes
Deleted inode 11 has zero dtime.  Fix? yes

Pass 2: Checking directory structure
Pass 3: Checking directory connectivity
Pass 4: Checking reference counts
Pass 5: Checking group summary information
Block bitmap differences:  -(7520--8191) -(8261--11689)
Fix? yes

Free blocks count wrong for group #0 (19396, counted=23497).
Fix? yes

Free blocks count wrong (211269, counted=215370).
Fix? yes

Inode bitmap differences:  -11
Fix? yes

Free inodes count wrong for group #0 (15691, counted=15692).
Fix? yes

Free inodes count wrong (125675, counted=125676).
Fix? yes


/dev/md0: ***** FILE SYSTEM WAS MODIFIED *****
/dev/md0: 20/125696 files (5.0% non-contiguous), 35606/250976 blocks
mounting /boot ...
editing initrd ...
88674+1 records in
88674+1 records out
gunziping /mnt/debinst/boot/initrd.gz ...
gziping /mnt/debinst/boot/initrd ... wait 5 minutes
Image Name:   initrd
Created:      Fri Feb 27 17:12:02 2009
Image Type:   ARM Linux RAMDisk Image (gzip compressed)
Data Size:    5674866 Bytes = 5541.86 kB = 5.41 MB
Load Address: 0x00000000
Entry Point:  0x00000000
unmount /boot ...
umount: /mnt/debinst/boot: device is busy
umount: /mnt/debinst/boot: device is busy
#
相変わらず umount できていないが、とりあえず終わった。

電源 OFF

ハックキットで起動

HDD の交換（LS-WSGL 以外）

非該当。

起動

これは、シリアルコンソールでみないと、 改善できたかどうかわからないな。

１階の Mebius から２階の VAIO に Remote DeskTop でログインして、 VAIO からシリアルコンソールをつなぐ。
なにやってんだか。 

	:
	:
---- in hackkit linuxrc ---
-- rebuild mdadm.conf for BOOT, ROOTFS --
md: md10 stopped.
mdadm: /dev/disk2_1 has wrong uuid.
mdadm: /dev/disk1_1 has wrong uuid.
mdadm: /dev/disk2_2 has wrong uuid.
mdadm: /dev/disk1_2 has wrong uuid.
md: bind<sda5>
md: bind<sdb5>
raid1: raid set md10 active with 2 out of 2 mirrors
mdadm: /dev/md10md: md1 stopped.
 has been started with 2 drives.
mdadm: /dev/disk2_1 has wrong uuid.
mdadm: /dev/disk1_1 has wrong uuid.
md: bind<sda2>
md: bind<sdb2>
raid1: raid set md1 active with 2 out of 2 mirrors
mdadm: /dev/md1 md: md0 stopped.
has been started with 2 drives.
md: bind<sda1>
md: bind<sdb1>
raid1: raid set md0 active with 2 out of 2 mirrors
mdadm: /dev/md0 has been started with 2 drives.
-- setup max error counts --
/sys/block/md0/md/maxerr_cnt is setted to -1
/sys/block/md1/md/maxerr_cnt is setted to -1
/sys/block/md10/md/maxerr_cnt is setted to -1
XFS mounting filesystem md1
VFS: Mounted root (xfs filesystem).
Trying to move old root to /initrd ... okay
Freeing init memory: 112K
INIT: version 2.86 booting
Setting the system clock.
Activating swap...Adding 1003896k swap on /dev/md10.  Priority:-1 extents:1 across:1003896k
done.
Setting the system clock.
Cleaning up ifupdown....
Loading kernel modules...done.
Checking file systems...fsck 1.41.3 (12-Oct-2008)
done.
Setting kernel variables (/etc/sysctl.conf)...Unknown HZ value! (114) Assume 100.
done.
Mounting local filesystems...EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended
XFS mounting filesystem sda6
XFS mounting filesystem sdb6
done.
Activating swapfile swap...done.
Setting up networking....
Configuring network interfaces...eth0: link down
done.
INIT: Entering runlevel: 2
Starting enhanced syslogd: rsyslogdeth0: link up<5>, full duplex<5>, speed 1 Gbps<5>
.
usbcore: registered new driver usbfs
usbcore: registered new driver hub
ehci_platform ehci_platform.4523: EHCI Platform Host Controller
ehci_platform ehci_platform.4523: new USB bus registered, assigned bus number 1
ehci_platform ehci_platform.4523: irq 17, io mem 0x00000000
ehci_platform ehci_platform.4523: USB 0.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
ehci_platform ehci_platform.16781: EHCI Platform Host Controller
ehci_platform ehci_platform.16781: new USB bus registered, assigned bus number 2
ehci_platform ehci_platform.16781: irq 12, io mem 0x00000000
ehci_platform ehci_platform.16781: USB 0.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 1 port detected
Initializing USB Mass Storage driver...
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
usbcore: registered new driver usblp
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
Starting internet superserver: inetd.
Starting periodic command scheduler: crond.

Debian GNU/Linux 5.0 mini ttyS0

mini login: BuffaloSwPollingCheck> SW_POWER_ON
起動してきた。前回の 
chmod: failed to get attributes of `/var/log/dmesg': No such file or directory
というエラーは出ていない。

最初の設定

ログイン

Debian GNU/Linux 5.0 mini ttyS0

mini login: BuffaloSwPollingCheck> SW_POWER_ON

Debian GNU/Linux 5.0 mini ttyS0

mini login: guest
Password:
Linux mini 2.6.16.16-arm1 #383 Mon Nov 10 13:33:20 JST 2008 armv5tejl

The programs included with the Debian GNU/Linux system are free software;
the exact distribution terms for each program are described in the
individual files in /usr/share/doc/*/copyright.

Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
permitted by applicable law.
No directory, logging in with HOME=/
guest@mini:/$

root になる

guest@mini:/$ su - root
Password:
mini:~#

時計を合わせる

mini:~# date
Fri Feb 27 17:29:02 JST 2009
mini:~#
あっている。

最初の設定の残りの設定と、
時刻同期、
Windows 向けファイルサーバまでスクリプトを使う。 

mini:~# cd /mnt/disk1/share/hackkit
mini:/mnt/disk1/share/hackkit# ls
hackkit_090226.tar.gz  hackkit_config.sample  rsync_090225.sh
hackkit_090227.sh      mkimage                setup_090203.sh
hackkit_config         ramroot_090225.sh
mini:/mnt/disk1/share/hackkit# sh -x setup_090203.sh
ackkit_config         ramroot_090225.sh
mini:/mnt/disk1/share/hackkit# sh setup_090203.sh
passwd root
Enter new UNIX password:
Retype new UNIX password:
No password supplied
Enter new UNIX password:
Retype new UNIX password:
Sorry, passwords do not match
passwd: Authentication information cannot be recovered
passwd: password unchanged

mini:/mnt/disk1/share/hackkit# sh -x setup_090203.sh
+ echo passwd root
passwd root
+ passwd root
Enter new UNIX password:
Retype new UNIX password:
passwd: password updated successfully
+ addgroup --gid 1001 yamasita
Adding group `yamasita' (GID 1001) ...
Done.
+ echo adduser yasunari
adduser yasunari
+ adduser --home /home/yamasita/yasunari --ingroup yamasita --uid 1001 --gecos 'Yasunari Yamashita' yasunari
Adding user `yasunari' ...
Adding new user `yasunari' (1001) with group `yamasita' ...
Creating home directory `/home/yamasita/yasunari' ...
Copying files from `/etc/skel' ...
Enter new UNIX password:
Retype new UNIX password:
passwd: password updated successfully
+ deluser guest
Removing user `guest' ...
Warning: group `guest' has no more members.
userdel: user guest is currently logged in
/usr/sbin/deluser: `/usr/sbin/userdel guest' returned error code 8. Exiting.
+ apt-get update
Hit http://ftp.jp.debian.org lenny Release.gpg
Hit http://security.debian.org lenny/updates Release.gpg
Hit http://ftp.jp.debian.org lenny Release
Hit http://security.debian.org lenny/updates Release
Ign http://ftp.jp.debian.org lenny/main Packages/DiffIndex
Ign http://security.debian.org lenny/updates/main Packages/DiffIndex
Ign http://ftp.jp.debian.org lenny/main Sources/DiffIndex
Ign http://security.debian.org lenny/updates/main Sources/DiffIndex
Hit http://security.debian.org lenny/updates/main Packages
Hit http://ftp.jp.debian.org lenny/main Packages
Hit http://security.debian.org lenny/updates/main Sources
Hit http://ftp.jp.debian.org lenny/main Sources
Reading package lists... Done
+ apt-get upgrade
Reading package lists... Done
Building dependency tree
Reading state information... Done
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
+ apt-get install ntp
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following extra packages will be installed:
  libcap1 libedit2 perl perl-modules
Suggested packages:
  ntp-doc perl-doc libterm-readline-gnu-perl libterm-readline-perl-perl
The following NEW packages will be installed:
  libcap1 libedit2 ntp perl perl-modules
0 upgraded, 5 newly installed, 0 to remove and 0 not upgraded.
Need to get 8257kB of archives.
After this operation, 29.2MB of additional disk space will be used.
Do you want to continue [Y/n]? y
Get:1 http://ftp.jp.debian.org lenny/main libedit2 2.11~20080614-1 [64.5kB]
Get:2 http://ftp.jp.debian.org lenny/main perl-modules 5.10.0-19 [3189kB]
Get:3 http://ftp.jp.debian.org lenny/main perl 5.10.0-19 [4535kB]
Get:4 http://ftp.jp.debian.org lenny/main libcap1 1:1.10-14 [9074B]
Get:5 http://ftp.jp.debian.org lenny/main ntp 1:4.2.4p4+dfsg-8 [459kB]
Fetched 8257kB in 19s (415kB/s)
Selecting previously deselected package libedit2.
(Reading database ... 8591 files and directories currently installed.)
Unpacking libedit2 (from .../libedit2_2.11~20080614-1_armel.deb) ...
Selecting previously deselected package perl-modules.
Unpacking perl-modules (from .../perl-modules_5.10.0-19_all.deb) ...
Selecting previously deselected package perl.
Unpacking perl (from .../perl_5.10.0-19_armel.deb) ...
Selecting previously deselected package libcap1.
Unpacking libcap1 (from .../libcap1_1%3a1.10-14_armel.deb) ...
Selecting previously deselected package ntp.
Unpacking ntp (from .../ntp_1%3a4.2.4p4+dfsg-8_armel.deb) ...
Processing triggers for man-db ...
Setting up libedit2 (2.11~20080614-1) ...
Setting up libcap1 (1:1.10-14) ...
Setting up ntp (1:4.2.4p4+dfsg-8) ...
Starting NTP server: ntpd.
Setting up perl-modules (5.10.0-19) ...
Setting up perl (5.10.0-19) ...
+ mv /etc/ntp.conf /etc/ntp.conf.orig
+ sed -e 's/^server/# server/' -e '/ntp.your-provider.example/aserver ntp3.jst.mfeed.ad.jp\
server ntp2.jst.mfeed.ad.jp\
server ntp1.jst.mfeed.ad.jp' /etc/ntp.conf.orig
+ apt-get install samba
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following extra packages will be installed:
  libcups2 libkeyutils1 libkrb53 libldap-2.4-2 libtalloc1 libwbclient0
  samba-common ucf
Suggested packages:
  cups-common krb5-doc krb5-user smbldap-tools ldb-tools
The following NEW packages will be installed:
  libcups2 libkeyutils1 libkrb53 libldap-2.4-2 libtalloc1 libwbclient0 samba
  samba-common ucf
0 upgraded, 9 newly installed, 0 to remove and 0 not upgraded.
Need to get 8603kB of archives.
After this operation, 23.0MB of additional disk space will be used.
Do you want to continue [Y/n]? y
Get:1 http://ftp.jp.debian.org lenny/main libkeyutils1 1.2-9 [5228B]
Get:2 http://ftp.jp.debian.org lenny/main libkrb53 1.6.dfsg.4~beta1-5 [448kB]
Get:3 http://ftp.jp.debian.org lenny/main libldap-2.4-2 2.4.11-1 [179kB]
Get:4 http://ftp.jp.debian.org lenny/main ucf 3.0016 [64.4kB]
Get:5 http://ftp.jp.debian.org lenny/main libcups2 1.3.8-1lenny4.1 [157kB]
Get:6 http://ftp.jp.debian.org lenny/main libtalloc1 1.2.0~git20080616-1 [13.3kB]
Get:7 http://ftp.jp.debian.org lenny/main libwbclient0 2:3.2.5-4 [78.1kB]
Get:8 http://ftp.jp.debian.org lenny/main samba-common 2:3.2.5-4 [3366kB]
Get:9 http://ftp.jp.debian.org lenny/main samba 2:3.2.5-4 [4292kB]
Fetched 8603kB in 21s (407kB/s)
Preconfiguring packages ...

Package configuration





   lqqqqqqqqqqqqqqqqqqqqqqqqqqqqu Samba Server tqqqqqqqqqqqqqqqqqqqqqqqqqqqqk
   x Please specify the workgroup you want this server to appear to be in   x
   x when queried by clients. Note that this parameter also controls the    x
   x domain name used with the security=domain setting.                     x
   x                                                                        x
   x Workgroup/Domain Name:                                                 x
   x                                                                        x
   x YAMASITA______________________________________________________________ x
   x                                                                        x
   x                                 <Ok>                                   x
   x                                                                        x
   mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj


































Package configuration



 lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqu Samba Server tqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk
 x                                                                           x
 x If your computer gets IP address information from a DHCP server on the    x
 x network, the DHCP server may also provide information about WINS servers  x
 x ("NetBIOS name servers") present on the network.  This requires a change  x
 x to your smb.conf file so that DHCP-provided WINS settings will            x
 x automatically be read from /etc/samba/dhcp.conf.                          x
 x                                                                           x
 x The dhcp3-client package must be installed to take advantage of this      x
 x feature.                                                                  x
 x                                                                           x
 x Modify smb.conf to use WINS settings from DHCP?                           x
 x                                                                           x
 x                    <Yes>                       <No>                       x
 x                                                                           x
 mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj



Selecting previously deselected package libkeyutils1.
(Reading database ... 9843 files and directories currently installed.)
Unpacking libkeyutils1 (from .../libkeyutils1_1.2-9_armel.deb) ...
Selecting previously deselected package libkrb53.
Unpacking libkrb53 (from .../libkrb53_1.6.dfsg.4~beta1-5_armel.deb) ...
Selecting previously deselected package libldap-2.4-2.
Unpacking libldap-2.4-2 (from .../libldap-2.4-2_2.4.11-1_armel.deb) ...
Selecting previously deselected package ucf.
Unpacking ucf (from .../archives/ucf_3.0016_all.deb) ...
Moving old data out of the way
Selecting previously deselected package libcups2.
Unpacking libcups2 (from .../libcups2_1.3.8-1lenny4.1_armel.deb) ...
Selecting previously deselected package libtalloc1.
Unpacking libtalloc1 (from .../libtalloc1_1.2.0~git20080616-1_armel.deb) ...
Selecting previously deselected package libwbclient0.
Unpacking libwbclient0 (from .../libwbclient0_2%3a3.2.5-4_armel.deb) ...
Selecting previously deselected package samba-common.
Unpacking samba-common (from .../samba-common_2%3a3.2.5-4_armel.deb) ...
Selecting previously deselected package samba.
Unpacking samba (from .../samba_2%3a3.2.5-4_armel.deb) ...
Processing triggers for man-db ...
Setting up libkeyutils1 (1.2-9) ...
Setting up libkrb53 (1.6.dfsg.4~beta1-5) ...
Setting up libldap-2.4-2 (2.4.11-1) ...
Setting up ucf (3.0016) ...
Setting up libcups2 (1.3.8-1lenny4.1) ...
Setting up libtalloc1 (1.2.0~git20080616-1) ...
Setting up libwbclient0 (2:3.2.5-4) ...
Setting up samba-common (2:3.2.5-4) ...

Creating config file /etc/samba/smb.conf with new version
Setting up samba (2:3.2.5-4) ...
Generating /etc/default/samba...
tdbsam_open: Converting version 0 database to version 3.
account_policy_get: tdb_fetch_uint32 failed for field 1 (min password length), returning 0
account_policy_get: tdb_fetch_uint32 failed for field 2 (password history), returning 0
account_policy_get: tdb_fetch_uint32 failed for field 3 (user must logon to change password), returning 0
account_policy_get: tdb_fetch_uint32 failed for field 4 (maximum password age), returning 0
account_policy_get: tdb_fetch_uint32 failed for field 5 (minimum password age), returning 0
account_policy_get: tdb_fetch_uint32 failed for field 6 (lockout duration), returning 0
account_policy_get: tdb_fetch_uint32 failed for field 7 (reset count minutes), returning 0
account_policy_get: tdb_fetch_uint32 failed for field 8 (bad lockout attempt), returning 0
account_policy_get: tdb_fetch_uint32 failed for field 9 (disconnect time), returning 0
account_policy_get: tdb_fetch_uint32 failed for field 10 (refuse machine password change), returning 0
Importing account for root...ok
Importing account for daemon...ok
Importing account for bin...ok
Importing account for sys...ok
Importing account for sync...ok
Importing account for games...ok
Importing account for man...ok
Importing account for lp...ok
Importing account for mail...ok
Importing account for news...ok
Importing account for uucp...ok
Importing account for proxy...ok
Importing account for www-data...ok
Importing account for backup...ok
Importing account for list...ok
Importing account for irc...ok
Importing account for gnats...ok
Importing account for nobody...ok
Importing account for libuuid...ok
Importing account for guest...ok
Importing account for telnetd...ok
Importing account for yasunari...ok
Importing account for ntp...ok
Adding group `sambashare' (GID 105) ...
Done.
Starting Samba daemons: nmbd smbd.
+ echo
+ echo '[share]'
+ echo '        comment = hackkit share'
+ echo '        path = /mnt'
+ echo '        writable = Yes'
+ echo '        create mask = 0660'
+ echo '        directory mask = 0770'
+ /etc/init.d/samba reload
Reloading /etc/samba/smb.conf: smbd only.
+ echo smbpasswd -a yasunari
smbpasswd -a yasunari
+ smbpasswd -a yasunari
New SMB password:
Retype new SMB password:
+ mkdir /mnt/share
+ chgrp yamasita /mnt/share/
+ chmod g+w /mnt/share
+ apt-get clean
mini:/mnt/disk1/share/hackkit#
終わった。 
E: Directory '/var/log/apt/' missing
も出なかった。

動作確認

LED の確認

問題なし。

USB メモリの認識

mini:/mnt/disk1/share/hackkit# tail -f /var/log/messages
	:
	:
usb 1-1: new full speed USB device using ehci_platform and address 2
usb 1-1: configuration #1 chosen from 1 choice
scsi2 : SCSI emulation for USB Mass Storage devices
Feb 27 17:45:15 mini kernel: usb 1-1: new full speed USB device using ehci_platform and address 2
Feb 27 17:45:15 mini kernel: usb 1-1: configuration #1 chosen from 1 choice
Feb 27 17:45:15 mini kernel: scsi2 : SCSI emulation for USB Mass Storage devices
  Vendor: eUSB      Model: Memory Stick      Rev: 5.06
  Type:   Direct-Access                      ANSI SCSI revision: 02
SCSI device sdc: 126912 512-byte hdwr sectors (65 MB)
sdc: Write Protect is off
sdc: assuming drive cache: write through
SCSI device sdc: 126912 512-byte hdwr sectors (65 MB)
sdc: Write Protect is off
sdc: assuming drive cache: write through
 sdc:Feb 27 17:45:22 mini kernel:  Vendor: eUSB      Model: Memory Stick      Rev: 5.06
Feb 27 17:45:22 mini kernel:  Type:   Direct-Access                      ANSI SCSI revision: 02
Feb 27 17:45:22 mini kernel: SCSI device sdc: 126912 512-byte hdwr sectors (65 MB)
Feb 27 17:45:22 mini kernel: sdc: Write Protect is off
Feb 27 17:45:22 mini kernel: SCSI device sdc: 126912 512-byte hdwr sectors (65 MB)
Feb 27 17:45:22 mini kernel: sdc: Write Protect is off
 sdc1
sd 2:0:0:0: Attached scsi removable disk sdc
sd 2:0:0:0: Attached scsi generic sg2 type 0
Feb 27 17:45:22 mini kernel: sdc: sdc1
Feb 27 17:45:22 mini kernel: sd 2:0:0:0: Attached scsi removable disk sdc
Feb 27 17:45:22 mini kernel: sd 2:0:0:0: Attached scsi generic sg2 type 0
マウントしてみる。 
mini:/mnt/disk1/share/hackkit# mkdir /tmp/usb
mini:/mnt/disk1/share/hackkit# mount /dev/sdc1 /tmp/usb
mini:/mnt/disk1/share/hackkit# ls /tmp/usb
dcim  memstick.ind
mini:/mnt/disk1/share/hackkit# umount /tmp/usb/
mini:/mnt/disk1/share/hackkit#
問題なさそう。

プリンタの認識（LS-GL 以外）

mini:/mnt/disk1/share/hackkit# !tail
tail -f /var/log/messages
	:
	:
Feb 27 17:48:03 mini kernel: usb 1-1: new full speed USB device using ehci_platform and address 3
Feb 27 17:48:03 mini kernel: usb 1-1: configuration #1 chosen from 1 choice
Feb 27 17:48:03 mini kernel: drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 3 if 0 alt 0 proto 2 vid 0x04B8 pid 0x0005
OK.

LS-WSGL での確認完了！

LinkStation Mini
LS-WSGL
バッファローダイレクト
楽天市場
Amazon
Yahoo!ショッピング
Livedoor デパート
Sofmap
ムラウチドットコム
ヤマダ電機WEB
パソＱ
←
アーカイブの作り直し 		ハックの記録
LinkStation／玄箱 をハックしよう 		→
LS-XHL, LS-QL 対応ハックキットの確認（２）LS-GL
Copyright (C) 2003-2009 Yasunari Yamashita. All Rights Reserved.
yasunari ＠ yamasita.jp　山下康成＠京都府向日市